How to do if the printer does not spray out any characters?

I believe that many users will encounter a variety of problems or failures when using inkjet equipment, at this time you need to refer to the inkjet manual, and then use troubleshooting methods to check the factors that may lead to failure. This article will introduce you to the possible factors that the inkjet printer can not spray out the word, including the incorrect setting of parameters, the wrong editing of the font or the fault cause of the nozzle blockage.

There are several possible causes

1.The printer is not turned on. Check that the inkjet printer has started normally. The nozzle ink drop falls steadily into the recycle tank.

2. The inkjet printer does not start the printing state. Check the inkjet operation interface to make sure whether it is in the printing status

3. The parameters set by the inkjet printer are incorrect. You need to set parameters according to the user manual

4. Characters are not edited or are edited incorrectly. Check whether the correct character content has been entered on the operating interface, if not, you need to erase all the content and then re-edit.

5. The photocell switch is improperly adjusted. When the product passes through the photocell   the indicator light of the photocell is supposed to changed. If there is no change, it indicates that the position of the photocell is not accurate, or the sensitivity of the photocell is not adjusted well, and the position of the photocell needs to be re-installed, or the sensitivity of the photocell needs to be re-adjusted.

If you can not solve the character printing problem of the inkjet printer through the above methods in the practice, You are proposed to contact with expert team of EC-JET for help.